ASE10-2S outdoor Led Advertising Screen Price Shenzhen Manufacturer FULL Color

ASE10-2S is the high-brightness version of the P10 ASE cabinet: 1/2 scan instead of 1/4 lifts output to >6,000 nits in the same 960 × 960 × 100 mm enclosure, IP43, 200–240 V AC 60 Hz. Order it for a wall that takes direct afternoon sun — east or west facing building advertising, roadside boards and stadium exteriors. Fixed installation, rear service.

SKU: ase10-2s-outdoor-led-advertising-screen-price-shenzhen-manufacturer-full-color 分类: ,

描述

There are two versions of the 10 mm outdoor fixed cabinet in the ASE range, and the difference is a single number: scan. The ASE10-2S drives the modules at 1/2 scan, the standard ASE10 at 1/4. Same pitch, same 960 × 960 × 100 mm cabinet, same pixel count — but the higher scan rate pushes brightness from 5,000 to 6,000 nits, which is the whole reason the 2S version exists.

Order the 2S when the wall faces sun and you need the extra headroom; order the standard ASE10 when the screen is mostly seen after dark and power budget matters more than peak brightness.

ASE10 vs ASE10-2S

Parameter ASE10 ASE10-2S
Model ASE10 ASE10-2S
Scan mode 1/4 1/2
Brightness > 5,000 nits > 6,000 nits
Refresh rate 1,920 Hz 1,920 Hz
Cabinet size 960 × 960 × 145 960 × 960 × 100
Resolution per cabinet 96 × 96 96 × 96
Waterproof rating IP43 IP43
Input voltage 200–240VAC 60 Hz 200–240VAC 60 Hz

Why Scan Rate Changes Brightness

Scan rate is how many rows of LEDs are lit at the same time. At 1/2 scan half the rows are driven simultaneously, so each LED stays on roughly four times longer within a frame than it would at 1/8 scan. Longer on-time means more light per refresh cycle — that is why the same pitch, module and LED bin can be quoted at two different brightness figures. The trade-off is power: a 2S cabinet draws more current for the same screen area, so size the supply and the distro accordingly.

Specification — ASE10-2S

Parameter ASE10-2S / value
Model ASE10-2S
Pixel pitch 10 mm
Cabinet size 960 × 960 × 100 mm
Module size 320 × 160 mm
Resolution per cabinet 96 × 96 px (9,216 pixels)
Brightness > 6,000 nits
Refresh rate 1,920 Hz
Scan mode 1/2
Input voltage 200–240VAC 60 Hz
Waterproof rating IP43
Maintenance rear service
Power supply Muen
Control system Novastar

Cabinet Count for Common Wall Sizes

Both versions share the 960 mm cabinet, so the matrix below applies to either — only the brightness and power figures change:

Target size Cabinet matrix Active area Resolution
4 × 3 m 5 × 4 = 20 cabinets 4.80 × 3.84 m (18.43 m²) 480 × 384 px
6 × 3 m 7 × 4 = 28 cabinets 6.72 × 3.84 m (25.80 m²) 672 × 384 px
8 × 4 m 9 × 5 = 45 cabinets 8.64 × 4.80 m (41.47 m²) 864 × 480 px
10 × 5 m 11 × 6 = 66 cabinets 10.56 × 5.76 m (60.83 m²) 1,056 × 576 px

Where the ASE10-2S Is Used

  • Highway-facing building walls and gantries
  • Tall building facades seen from a distance
  • Stadium and arena perimeter ribbon signage
  • Large plaza and public square screens
  • Factory and logistics park gateway signage
  • Wholesale market and industrial estate signage
  • Petrol station pylon signage at a trunk road
  • Shopping mall exterior walls fronting a main road
  • Outdoor festival and concert stage backdrop
  • Airport and station approach signage
ase10-2s-outdoor-led-advertising-screen-price-shenzhen-manufacturer-full-color LED display specification sheet 1
ase10-2s-outdoor-led-advertising-screen-price-shenzhen-manufacturer-full-color LED display specification sheet 2
ase10-2s-outdoor-led-advertising-screen-price-shenzhen-manufacturer-full-color LED display specification sheet 3
ase10-2s-outdoor-led-advertising-screen-price-shenzhen-manufacturer-full-color LED display specification sheet 4
ase10-2s-outdoor-led-advertising-screen-price-shenzhen-manufacturer-full-color LED display specification sheet 5
ase10-2s-outdoor-led-advertising-screen-price-shenzhen-manufacturer-full-color LED display specification sheet 6
ase10-2s-outdoor-led-advertising-screen-price-shenzhen-manufacturer-full-color LED display specification sheet 7
ase10-2s-outdoor-led-advertising-screen-price-shenzhen-manufacturer-full-color LED display specification sheet 8

FAQ

Q: When is the extra brightness worth paying for?
A: When the screen competes with direct sun. A wall that faces east or west and is viewed in the afternoon needs the 6,000 nits of the 2S; a wall lit at night or heavily shaded does not, and the standard 5,000 saves on power and supply sizing.

Q: Does higher scan mean more power?
A: Yes. Longer on-time per LED means higher current draw for the same area, so the power supply and the site distribution need sizing for the 2S figures, not the standard ones. Give us the wall size and we return the load calculation.

Q: Can I mix 2S and standard cabinets in one wall?
A: Same pitch and same cabinet geometry, so they lock together mechanically — but the brightness difference is visible as a seam on flat colour. Mix only if you can run them at a common calibrated brightness, which wastes the point of the 2S.

Q: What is included in the shipment?
A: Cabinets, modules already fitted, power supplies, receiving cards and the connecting cables. Sending cards, video processors and the steel structure are quoted separately.

Q: What is the viewing distance for a P10 outdoor screen?
A: Around 15 m for comfortable reading and 25 m for headlines. Inside 10 m the pixel structure is visible on flat colour, so P10 is a long-throw pitch — highway walls, tall building faces, stadium ribbons — not a shopfront screen.

Related Screens

  • ASE series — IP43 value cabinet for sheltered walls
  • ASL series — IP65 sealed cabinet for open positions
  • AS series — entry outdoor fixed range

评价

目前还没有评价

成为第一个“ASE10-2S outdoor Led Advertising Screen Price Shenzhen Manufacturer FULL Color” 的评价者

您的邮箱地址不会被公开。 必填项已用 * 标注

粤ICP备2020076087号