QX3-1000mm Indoor Sphere LED Display P3 1000 mm Diameter

The QX3-1000mm is a 1000 mm indoor LED sphere at P3 — a full ball built from tapered modules rather than a bent panel. Spheres are specified when the screen has to be an object in the room, not a rectangle on the wall: atriums, exhibition stands, car showrooms, museum halls.

SKU: QX3-1000mm 分类: 标签: 品牌:

描述

The QX3-1000mm is a 1000 mm indoor LED sphere at P3 — a full ball built from tapered modules rather than a bent panel. Spheres are specified when the screen has to be an object in the room, not a rectangle on the wall: atriums, exhibition stands, car showrooms, museum halls.

Key Features

  • 1000 mm sphere at P3: a complete ball, not a curved panel — the cabinet set is shaped and keyed so the modules close into a true sphere with no flat facet left showing.
  • > 500 nits, 1,920 Hz refresh: indoor brightness tuned for a hanging centre-piece, with a refresh rate that keeps phone video and broadcast cameras clean.
  • 360° viewing: there is no front and no back — the sphere reads from every approach angle, which is why it works suspended over an atrium or on a plinth in a lobby.
  • Module-level curvature: each module carries the correct taper for its latitude on the ball, so the pixel pitch stays visually even from top to bottom instead of compressing at the poles.
  • Front service and hanging structure: the ball is built around a steel hub with a suspension point; modules and receiving cards are reached individually without dismantling the sphere.
  • Muen power, Novastar control: mapping software for spherical surfaces is standard in the Novastar toolchain, so you are not locked into a proprietary player.

Specification

Parameter Value
Model QX3-1000mm
Pixel P3
Usage Indoor
Brightness > 500 nits
Refresh Rate 1,920 Hz
Scan 1/16
Input Voltage 100–240 VAC, 50/60 Hz
Waterproof class IP43
Maintenance mode Front service
Power Brand Muen
System brand Novastar

Applications

Hotel and office atria, exhibition stands, car showrooms, museums and science centres, shopping mall centre courts.

Ordering Notes

Price is per sphere including the cabinet set and internal hub. Suspension rigging, plinth and installation are quoted separately. Provide the ceiling height and load limit before ordering.

QX3-1000mm LED display specification sheet 1
QX3-1000mm LED display specification sheet 2
QX3-1000mm LED display specification sheet 3

FAQ

Q: Can I get a different diameter?
A: 1000 mm is the standard size for this model. The QX range covers other diameters — tell us the size you need and we will confirm which model matches, or whether a custom sphere build is required.

Q: How does content work on a sphere?
A: The surface is mapped as a sphere in the playback software: you supply a flat image or video and the player wraps it around the ball. Novastar’s mapping tools handle the projection, so standard media files work — you do not need to pre-distort the artwork.

Q: How is it installed?
A: The sphere hangs from a single suspension point on an internal steel hub, or sits on a plinth for floor standing. Tell us the ceiling height, the load limit of the structure above and whether the ball must be visible from below — the hub and rigging differ.

Q: How do you service modules inside a ball?
A: Each module is individually removable from the outside; the receiving cards and power supplies sit on the internal hub. No part of the sphere has to be taken down for a single module swap.

Q: What viewing distance suits this diameter?
A: At P3 on a 1000 mm ball, the picture holds up from about 4 m away. Closer than that and the ball reads as an object rather than an image — which is usually the point.

评价

目前还没有评价

成为第一个“QX3-1000mm Indoor Sphere LED Display P3 1000 mm Diameter” 的评价者

您的邮箱地址不会被公开。 必填项已用 * 标注

粤ICP备2020076087号