描述
CVT320 is a single‑mode optical fiber converter launched by NovaStar. It converts optical signals into electrical signals for video source devices and LED displays. No driver is required — it is plug‑and‑play, and it extends data transmission over long distances, which is ideal when the control room is far away from the screen.
Key Features
- Plug and play: converts optical signals into electrical signals with no driver required.
- Long‑distance transmission: overcomes the 100 m copper limit of standard Ethernet cable.
- Works with or without optical send cards: supports send cards equipped with an optical port as well as standard send cards, using the corresponding connection method.
- Gigabit Ethernet port plus one optical module port (TX/RX).
- Clear status indicators for power, optical link, Ethernet link and data output.
- Compact 1U‑width housing with a rugged metal enclosure.
Specifications
| Input voltage | 100–240V~, 50/60Hz, 0.35A |
| Rated power | 3.5W |
| Operating temperature | −20°C to 70°C |
| Operating humidity | 10%RH to 90%RH, non‑condensing |
| Storage temperature | −30°C to 80°C |
| Dimensions | 149.0mm × 135.0mm × 38.0mm |
| Net weight | 0.53kg |
| Compliance | CE, RoHS, PSE, FCC, IC, NTRA, CB, UL |
Status Indicators
| POWER | Red — steady on: power input normal |
| FX/ACT | Green — steady on: optical port link normal |
| TP/ACT | Green — steady on: Ethernet link normal |
| DATA | Green — blinking: Ethernet data output normal |
Packaging Information
- Inner box (kraft paper box): 335mm × 190mm × 62mm
- Foam: 330mm × 180mm × 5mm (top) / 330mm × 180mm × 53mm (bottom)
- Outer box (kraft paper box): 400mm × 365mm × 355mm
- Accessories: 1 × Power Cable, 1 × Certificate of Conformity
Applications
The CVT320 is used for data transmission over long distances. Users can send cards with or without optical ports using the corresponding connection methods — typically for large outdoor screens, building facades, stadiums and stage rental where the signal run greatly exceeds 100 metres.
FAQ
Q: What is the CVT320 used for?
A: It is a single‑mode optical fiber converter from NovaStar. It converts optical signals into electrical signals for video sources and LED displays, so video data can travel far beyond the 100 m limit of ordinary Ethernet cable — ideal when the control room sits a long way from the screen.
Q: How far can the CVT320 transmit?
A: Single‑mode transmission distance is under 10 km, which covers virtually every fixed installation and large venue layout. It connects a Gigabit Ethernet port on one side and an optical module (TX/RX) on the other.
Q: Do I need a special send card to use it?
A: No. The CVT320 works with send cards that have an optical port and with standard send cards with only Ethernet ports — just use the matching connection method shown in the manual.
Q: What are the power and environmental requirements?
A: 100–240V~ 50/60Hz input with only 3.5W rated power. Operating range is −20°C to 70°C at 10–90%RH non‑condensing, and storage range is −30°C to 80°C.
Q: What is included in the box?
A: 1 × power cable and 1 × certificate of conformity. The unit measures 149.0 × 135.0 × 38.0 mm and weighs 0.53 kg.
评价
目前还没有评价