Introduction to LED Screen Maintenance Guide

In order to be able to extend the life of the LED display, it is necessary to maintain the LED display. If you don’t know how to maintain LED display, then this article will help you.

The Importance of Maintaining LED Display

Maintaining the LED display can not only present us with a better picture, but also discover the problems of the LED display in time, so as to make corresponding measures to solve them, extend the service life of the LED display and stabilize the operation of the LED display.

Maintenance tips for LED display

Regular inspection

Before the maintenance of the LED display, the LED display itself and other components should be inspected regularly.

The first step is to check the appearance of the LED display. Ensure that its appearance is free of scratches, stains, watermarks and other traces, which will have an impact on the display effect of the LED display and may cause damage to the LED module.
The second step is to check the other parts of the LED display. For example, the truss of the LED display, wires, data lines and other parts. To further confirm whether they are loose, fall off, damaged and other phenomena occur, if so, please take appropriate measures to solve the problem in time to reduce the occurrence of accidents.

Cleaning

After checking the LED display, we have to clean the surface of the LED display to reduce the impact of dust and stains on the LED display. The cleaning steps are as follows:

• Cut off the power supply of the LED display.
• Use a hair dryer or a vacuum cleaner to carry out dust removal operation on the LED display.
• For some stubborn stains, cotton swabs can be used.
• Use a cleaning cloth or soft bristle brush dipped in a little cleaner to fully clean the LED display.
• In the cleaning process, do not use too much force, try to gently wipe the LED display to avoid damage to the LED display.

Ventilation and heat dissipation

No matter what kind of electronic equipment will produce heat, LED display is no exception. The accumulation of heat will affect the operation of the internal components of the LED display, thus making the LED display screen can not reach the best state. Therefore, in order to be able to reduce its heat buildup, we have to install air conditioners or fans to assist in heat dissipation.

Avoid collision and vibration

When moving or maintaining the LED display, we should eliminate the occurrence of collision and vibration. Strong collision to a certain extent will cause damage to the LED display beads, strong vibration will damage the internal components of the LED display, thus shortening the life of the LED display.

Avoid frequent switching

Frequent switching on and off of the LED display will easily affect the internal circuitry of the LED display and reduce the service life of the LED display.

Moisture and storage requirements

If the LED display is not used for more than a few days in an environment with high humidity, it is necessary to warm up the LED display. To first adjust the brightness of the LED display to 30%~50% range and light up part of the screen.

Then more than 12 hours of warm-up time, and finally adjust the brightness to 80% ~ 100%, light up all the screen, can effectively remove the moisture in the LED display, reduce the impact of moisture on the LED display.

When storing the LED display, the LED display should be placed in the environmental conditions where the temperature is less than 32° and the humidity is less than 55%. At the same time, in order to prevent the gnawing of some animals, for example: rats, cockroaches and other creatures, you can regularly spray the surrounding area with agents that animals do not like, for example: insect repellent, rodent repellent, etc.

If the humidity of the storage environment is high, then you can place desiccant or moisture-proof agent to reduce the impact of air humidity on the LED display. At the same time, you can wrap the LED module with a dust cover, which can reduce the intrusion of water and air and block the entry of dust and foreign matter.

LED display maintenance upgrade

Accessory Upgrade

Upgrading LED display accessories can bring you convenience. For example: when you carry the cabinet of LED display, you feel that the cabinet made of iron is very heavy, then you can upgrade the iron material to die-casting aluminum material. The cabinet made of die-cast aluminum is not only light, but also convenient and beautiful, which can greatly improve the efficiency of handling.

Software Upgrade

With the development of the times, the software system will be constantly updated. A good software system will, to a certain extent, improve the operational efficiency of the LED display and bring you more accurate parameter settings and simpler operation. Therefore, it is especially useful to upgrade the software in the LED display.

Hardware Upgrade

When you are not satisfied with the display effect of the LED display, the hardware upgrade of the LED display is the best solution. If you want more clarity, then you can replace the original LED module with one that has a smaller pixel pitch. If you want better performance, then replace the old control card with the latest one, which can support more functions.

Intelligent Transformation

If you have purchased the LED display for a long time, you should consider the intelligent transformation of it. Intelligent transformation is mainly the use of 4G and other Internet technologies to upgrade the LED display, with remote control, real-time updates and optimization of data functions, can bring you a different experience.

LED display failure problems and maintenance measures

Black screen

Distorted display screen

Abnormal display color

Contact professional LED display maintenance service

If there is a problem with your LED display that you cannot solve, then you can contact us at MuenLED. We will assign professional technicians to maintain your LED display and give you a detailed explanation.