描述
AFB6.67-1920mm — 1920 × 960 × 310 mm Outdoor Front-Opening LED Light Box
An outdoor double-sided LED light box with a 6.67 mm pixel pitch and a 1920 × 960 × 310 mm cabinet. Both faces hinge open towards the front, so the sign can be mounted flat on a wall or stand free on the ground and still be serviced from the pavement side. 288 × 144 pixels per face, IP65 on both sides, and a standard 1920 mm width that lines up into continuous runs.
Key Features
Front opening maintenance
The face hinges open on its frame. Receiving card, power supply and modules are all in front of you, so a lamp or a card is changed without touching the mounting and without any rear access — the single biggest cost saver on a street-level sign. On the double-sided version both faces open.
Built for direct sun
Brightness of >4000 nits with an anti-ultraviolet mask keeps the picture readable when the sun is on the face. Even illumination across the panel means no dark corners and no visible module mosaic.
IP65 both sides
Rated IP65 on both faces with a working range of −20 °C to +60 °C. Rain, dust and salt air do not get into the cabinet, which matters on a unit that lives outdoors for years.
Standard 1920 mm width
The 1920 mm cabinet is the standard module, so several units join into one continuous run. ODM/OEM sizes, colours and mounting frames are available.
Freestanding A-Frame mounting
The 310 mm deep cabinet stands on the ground as a self-supporting a-frame, so it needs no wall fixing and shows a face to each direction.
Specifications
| Parameter | Value |
|---|---|
| Cabinet size | 1920 × 960 × 310 mm |
| Pixel pitch | 6.67 mm |
| Module size | 320 × 160 mm |
| Resolution | 288 × 144 = 41,472 pixels per face |
| Brightness | >4000 nits |
| Refresh rate | 1920 Hz |
| Scan mode | 1/6 scan |
| Grayscale | 16 bit |
| Waterproof class | IP65 (both sides) |
| Working temperature | −20 °C to +60 °C |
| Input voltage | AC 200–240 V, 60 Hz |
| Power brand | Muen |
| Control system | Novastar |
| Maintenance | Front opening |
| Sides | Single sided or double sided |
| Installation | freestanding A-frame |
| Application | Outdoor |
FAQ
Q: What is the AFB6.67-1920mm, and where is it normally installed?
A: The AFB6.67-1920mm is an outdoor front-opening LED light box with a 1920 × 960 × 310 mm cabinet and a 6.67 mm pixel pitch. It comes as a single-sided unit for a wall, or double sided when the same message has to be read from two directions — shop fronts, bank and pharmacy fascias, petrol stations, hotel entrances, car park entrances, bus stops and roadside retail.
Q: How big is the display area and what resolution do I get?
A: The cabinet measures 1920 × 960 × 310 mm and carries 288 × 144 pixels, a total of 41,472 pixels per face. The module size is 320 × 160 mm with a 6.67 mm pixel pitch. A 1920 mm wide cabinet is the standard width, so several units line up edge to edge into one continuous run.
Q: How does the front-opening maintenance work?
A: Both faces of the AFB6.67-1920mm open forward on hinges. The cabinet does not need any clearance behind it, which is why it can sit flat against a wall or stand as an A-frame with no rear access at all. Modules, receiving card and power supply are all reachable from the front, so a service call does not mean dismantling the sign or hiring a lift.
Q: What are the power and control requirements?
A: The display runs on AC 200–240 V 60 Hz with a Muen power supply and a Novastar control system, so any standard Novastar sending card and software will drive it. Each cabinet has its own power input and data connectors, which lets the run be split into several independent sections if you need to.
Q: How is it protected outdoors, and can the size be customised?
A: The AFB6.67-1920mm is rated IP65 on both faces — waterproof, dustproof and anti-ultraviolet — with a working temperature range of −20 °C to +60 °C, so it keeps running through direct sun, rain and frost. The 1920 × 960 mm cabinet is the standard size; ODM/OEM cabinet sizes, colours and mounting frames are available on request.
评价
目前还没有评价