P3.91 Holographic Invisible Led Screen Indoor Advertising Display 1008x1623mm

描述

P3.91 Indoor Holographic Invisible LED Screen — 1008 x 1623 mm

A transparent LED poster panel with a 3.91 mm pixel pitch and a 1008 x 1623 mm cabinet. The screen reaches up to 80% light transmittance, so it can be hung on shop windows and glass walls to play advertising while keeping the interior visible. Several panels can be spliced horizontally and vertically into a seamless full-screen display.

Key Features

Seamless Full-Screen Splicing
Independent modules are joined with snap connectors in one step, so several panels can be combined horizontally and vertically into a large seamless screen instead of a fixed single poster.

Up to 80% Light Transmittance
The lamp board is built on high-transparency, high-temperature-resistant material. The screen does not block natural light and stays almost invisible on glass when it is switched off.

Integrated Lamp Driver with Static Scan
Driver IC is integrated into the lamp board and works in static scan mode, which delivers an FHD display effect and keeps the picture stable without visible scan lines.

16-bit Grayscale
16-bit grayscale processing produces rich, delicate colour transitions, so gradients and skin tones stay smooth at close viewing distance.

Quick-Release Latches
Modules are removed tool-free from the front service position, which makes post-maintenance fast and keeps downtime short.

Hang and Power On
One power cord, plug and play. The unit can be hung from the ceiling or mounted on a stand, used individually or combined into a video wall.

Specifications

FAQ

Q: What is the P3.91 Holographic Invisible Led Screen Indoor Advertising Display 1008x1623mm and where is it used?
A: It is an indoor transparent LED poster screen with a 1008 x 1623 mm cabinet and a 3.91 mm pixel pitch. Because the panel is see-through, it is normally hung behind shop windows, on glass partitions, in shopping malls, car showrooms, chain stores and exhibition booths, where it can play advertising without blocking the view or the daylight behind it.

Q: How large is the display area and what resolution does it give?
A: The cabinet measures 1008 x 1623 mm with an 80 mm profile, and the active area is 256 x 384 pixels, a total of 98,304 pixels. The pixel pitch is 3.91 mm with a 320 x 160 mm module, so the screen is sharp enough to be read from a few metres away while staying almost invisible from the back.

Q: How transparent is the screen, and what does it look like when it is off?
A: Light transmittance reaches up to 80%. With the power off the panel reads as a faint grey mesh on the glass rather than a black board, so the window display behind it is still visible. When it is on, the content appears to float in the air.

Q: What are the power and control requirements?
A: The screen runs on 200-240 VAC 60 Hz and uses a Muen power supply with a Novastar control system, so it can be driven by the usual Novastar sending card and software. One power cord per unit is enough – it is plug and play.

Q: How is the P3.91 Holographic Invisible Led Screen Indoor Advertising Display 1008x1623mm installed and maintained?

A: The unit can be hung from the ceiling with the supplied hanging bar or fixed on a floor stand, and several panels can be joined horizontally and vertically. Maintenance is back service through quick-release latches, so a module can be taken out without tools. Please allow a tolerance of about 10 mm on manual measurements.